Menu
REDUCED SHANK DIAMETER TYPE 3672 - 118° POINT POSITIVE EDGE
TYPE
For cast iron, high temperature alloys and steels up to 50 Rc.
Heavy duty hardened tool steel bodies provide shock resilient support for the thick, long carbide tip. Straight flutes and straight shank. Drill body diameter is smaller than tool diameter.
DRILL DIAMETER
RANGE (INCH)
DRILL DIAMETER
TOLERANCES
INCLUDED
ANGLE
LIP HEIGHT
T.I.V.
THRU 1/8" +.0000"/-.0005" +5°/-5° .0020"
OVER 1/8" THRU 1/4" -.0000"/-.0007" +5°/-5° .0030"
OVER 1/4" THRU 1/2" -.0000"/-.0010" +5°/-5° .0040"
OVER 1/2" THRU 1" -.0000"/-.0012" +3°/-3° .0050"
OVER 1" THRU 11/2" -.0000"/-.0015" +3°/-3° .0060"
Below is Lexington Cutter's selection of Die Drills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
SHANK
DIAM.
TOOL DIAMETER OVERALL
LENGTH
EDP
NO.
PRICE
EACH
DECIMAL FRAC.
   1/  .3125    5/16  1/ 3672620 $61.45
 .3438   11/32  3/ 3672622 65.45
 .3750    3/         3672624 70.35
 .4062   13/32  1/ 3672626 82.45
 .4375    7/16  1/ 3672628 95.55
 .4688   15/32  3/ 3672630 104.95
 .5000    1/         3672632 123.15
   3/  .4375    7/16  1/ 3672728 95.55
 .4688   15/32  3/ 3672730 104.95
 .5000    1/         3672732 123.15
 .5312   17/32         3672734 141.25
 .5625    9/16         3672736 146.10
 .5938   19/32         3672738 154.55
 .6250    5/         3672740 159.30
 .6562   21/32  1/ 3672742 170.45
 .6875   11/16  1/ 3672744 175.05
 .7188   23/32         3672746 183.40
 .7500    3/         3672748 188.35
   1/  .5625    9/16         3672836 146.10
 .5938   19/32         3672838 154.55
 .6250    5/         3672840 159.30
 .6562   21/32  1/ 3672842 170.45
 .6875   11/16  1/ 3672844 175.05
 .7188   23/32         3672846 183.40
 .7500    3/         3672848 188.35
 .8125   13/16         3672852 337.75
 .8750    7/         3672856 344.80
 .9375   15/16         3672860 384.25
1.0000                 3672864 407.60
   3/  .8125   13/16         3672952 337.75
 .8750    7/         3672956 344.80
 .9375   15/16         3672960 384.25
1.0000                 3672964 407.60

Do you need special Die Drills?

If you can't find the specific Die Drills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Die Drills.

Thank you for using Lexington Cutter for your Die Drills.