Menu
FRACTIONAL TYPE 3675 - 140° POINT
TYPE
Carbide tip brazed to tool steel bodies.
140° cam relieved point designed for drilling abrasive and tough materials. Drill body diameter is smaller than tool diameter. For shallow holes, approximately 2 tool diameters deep. The short heavy construction allows more rigid hole drilling for tough applications where longer length drills are not needed.
Below is Lexington Cutter's selection of Die Drills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
TOOL DIAMETER OVERALL
LENGTH
EDP
NO.
PRICE
EACH
DECIMAL FRACTION
 .0938    3/32*         367506 $22.45
 .1094    7/64*         367507 22.95
 .1250    1/*         367508 22.95
 .1406    9/64*         367509 24.85
 .1562    5/32*         367510 28.55
 .1719   11/64*         367511 30.50
 .1875    3/16*         367512 36.10
 .2031   13/64*         367513 40.65
 .2188    7/32  1/ 367514 CALL
 .2344   15/64  1/ 367515 CALL
 .2500    1/         367516 CALL
 .2656   17/64         367517 CALL
 .2812    9/32         367518 CALL
 .2969   19/64         367519 CALL
 .3125    5/16         367520 CALL
 .3281   21/64         367521 CALL
 .3438   11/32         367522 CALL
 .3594   23/64         367523 CALL
 .3750    3/         367524 CALL
 .3906   25/64         367525 CALL
 .4062   13/32         367526 CALL
 .4219   27/64         367527 CALL
 .4375    7/16  1/ 367528 CALL
 .4531   29/64  1/ 367529 CALL
 .4688   15/32  1/ 367530 CALL
 .4844   31/64  1/ 367531 CALL
 .5000    1/         367532 CALL
*Solid carbide full length

Do you need special Die Drills?

If you can't find the specific Die Drills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Die Drills.

Thank you for using Lexington Cutter for your Die Drills.