Menu
FRACTIONAL TYPE 3664 - TAPER SHANK - 118° POINT - 8" FLUTE LENGTH
TYPE
Carbide tip brazed to hardened tool steel bodies. Same heavy duty construction as standard flute length taper shank drill. Designed for application requiring extended reach and use with drill bushings.
DRILL DIAMETER
RANGE (INCH)
DRILL DIAMETER
TOLERANCES
INCLUDED
ANGLE
LIP HEIGHT
T.I.V.
THRU 1/8" +.0000"/-.0005" +5°/-5° .0020"
OVER 1/8" THRU 1/4" -.0000"/-.0007" +5°/-5° .0030"
OVER 1/4" THRU 1/2" -.0000"/-.0010" +5°/-5° .0040"
OVER 1/2" THRU 1" -.0000"/-.0012" +3°/-3° .0050"
OVER 1" THRU 11/2" -.0000"/-.0015" +3°/-3° .0060"
Below is Lexington Cutter's selection of Taper Shank Twist Drills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
TOOL DIAMETER FLUTE
LENGTH
OVERALL
LENGTH
MORSE
TAPER
EDP
NO.
PRICE
EACH
DECIMAL FRAC.
 .5000    1/ 8 12 2 366432 $167.50
 .5312   17/32 8 12 2 366434 193.70
 .5625    9/16 8 12 2 366436 193.70
 .5938   19/32 8 12 2 366438 193.70
 .6250    5/ 8 12 2 366440 256.40
 .6562   21/32 8 12 2 366442 269.15
 .6875   11/16 8 12 2 366444 269.15
 .7188   23/32 8 12 2 366446 282.75
 .7500    3/ 8 12 2 366448 282.75
 .7812   25/32 8 12 2 366450 296.80

Do you need special Taper Shank Twist Drills?

If you can't find the specific Taper Shank Twist Drills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Taper Shank Twist Drills.

Thank you for using Lexington Cutter for your Taper Shank Twist Drills.