Menu
FRACTIONAL TYPE 3312 - THREE STRAIGHT FLUTES - FOR STEEL
TYPE
Flute long carbide tips brazed to hardened alloy steel bodies.
Below is Lexington Cutter's selection of Center Cutting End Mills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
One flute is center cutting.
Tool diameter tolerance: +.002"/-.000".
Straight shank with drive flats.
For plunge and side cut milling at moderate feeds and speeds.
TOOL DIAMETER SHANK
DIAMETER
NO. OF
FLUTES
CARBIDE
TIP
LENGTH
OVERALL
LENGTH
EDP
NO.
PRICE
EACH
DECIMAL FRAC.
 .3750    3/    3/ 3    1/  1/ 331212 $121.25
 .4375    7/16    3/ 3    3/  1/ 331214 123.90
 .5000    1/    1/ 3    3/         331216 126.90
 .5625    9/16    1/ 3    3/         331218 132.00
 .6250    5/    5/ 3    3/  1/ 331220 154.35
 .7500    3/    5/ 3    3/  3/ 331224 161.65
 .8750    7/    7/ 3    3/  3/ 331228 188.70
1.0000            7/ 3    3/  3/ 331232 207.25
1.1250  1/         3    3/         331236 221.90
1.2500  1/         3    3/         331240 257.30
1.5000  1/  1/ 3    3/         331248 305.85

Do you need special Center Cutting End Mills?

If you can't find the specific Center Cutting End Mills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Center Cutting End Mills.

Thank you for using Lexington Cutter for your Center Cutting End Mills.