Menu
FRACTIONAL TYPE 3740 - FOR NON-FERROUS & CAST IRON
TYPE
Carbide tips brazed to hardened alloy steel bodies. All sizes have three flutes and are used to mill round corners on square edges.
Below is Lexington Cutter's selection of Corner Rounding End Mills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
CIRCLE
RADIUS
TOOL
DIAM.
SHANK
DIAM.
END
DIAM.
CARBIDE
LENGTH
OVERALL
LENGTH
EDP
NO.
PRICE
EACH
   1/16    7/16    3/   17/64   13/32  3/ 374002 $156.10
   3/32    1/    3/   17/64   13/32  3/ 374003 156.10
   1/    5/    1/   19/64   13/32         374004 161.65
   5/32    3/    1/   23/64   13/32         374005 171.45
   3/16    7/    3/   13/32   13/32  1/ 374006 181.35
   1/            3/   13/32   15/32  1/ 374008 206.70
   5/16  1/    7/   13/32   19/32  1/ 374010 212.30
   3/  1/    7/   13/32   25/32  3/ 374012 220.55
   7/16  3/           13/32    7/         374014 245.65
   1/  1/           13/32                 374016 273.35
   5/          1/   21/32  7/32  1/ 374020 336.40

Do you need special Corner Rounding End Mills?

If you can't find the specific Corner Rounding End Mills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Corner Rounding End Mills.

Thank you for using Lexington Cutter for your Corner Rounding End Mills.