Menu
FRACTIONAL TYPE 3305 - UPSHARP - FOUR STRAIGHT FLUTES - FOR ALUMINUM & OTHER NON-FERROUS
TYPE
Flute long carbide tips brazed to hardened alloy steel bodies. Manufactured with sharp cutting edges on the periphery. Upsharp end mills permit maximum metal removal with less horsepower
Best when machine horsepower allows a higher capacity end mill.
Below is Lexington Cutter's selection of Four Straight Flute End Mills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
For milling aluminum, magnesium, zinc, brass, bronze, plastics and non-metals.
Tool diameter tolerance: +.005"/-.000".
Straight shank with drive flats.
TOOL DIAMETER SHANK
DIAMETER
CARBIDE
TIP
LENGTH
OVERALL
LENGTH
NO. OF
FLUTES
EDP
NO.
PRICE
EACH
DECIMAL FRAC.
 .2500    1/    3/    1/  1/ 4 330508 $66.80
 .4375    7/16    3/         11/16 4 330514 72.30
 .5000    1/    1/          1/ 4 330516 76.80
 .5625    9/16    1/          3/ 4 330518 86.15
 .6250    5/    1/          3/ 4 330520 90.30
 .6875   11/16    5/          3/ 4 330522 99.35
 .7500    3/    5/          5/ 4 330524 103.20
 .8125   13/16    5/          5/ 4 330526 118.10
 .8750    7/    5/  1/         4 330528 122.10
 .9375   15/16    7/  1/         4 330530 129.90
1.0000            7/  1/         4 330532 140.90
1.1250  1/          1/  1/ 4 330536 159.65
1.2500  1/          1/  1/ 4 330540 179.55
1.5000  1/  1/  1/  1/ 4 330548 222.40

Do you need special Four Straight Flute End Mills?

If you can't find the specific Four Straight Flute End Mills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Four Straight Flute End Mills.

Thank you for using Lexington Cutter for your Four Straight Flute End Mills.