Menu
FRACTIONAL TYPE 3303 - UPSHARP - TWO STRIAIGHT FLUTES - FOR ALUMINUM & OTHER NON-FERROUS
TYPE
Flute long carbide tips brazed to hardened alloy steel bodies. Manufactured with sharp cutting edges on the periphery. Upsharp end mills permit maximum metal removal with less horsepower
Large flute capacity for easier chip removal. Excellent when machine horsepower is too low for higher capacity end mills.
Below is Lexington Cutter's selection of Two Straight Flute End Mills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
For milling aluminum, magnesium, zinc, brass, bronze, plastics and non-metals.
Tool diameter tolerance: +.005"/-.000".
Straight shank with drive flats.
TOOL DIAMETER SHANK
DIAMETER
CARBIDE
TIP
LENGTH
OVERALL
LENGTH
NO. OF
FLUTES
EDP
NO.
DECIMAL FRAC.
 .2500    1/    3/    1/  1/ 2 330308
 .4375    7/16    3/         11/16 2 330314
 .5000    1/    1/          1/ 2 330316
 .5625    9/16    1/          3/ 2 330318
 .6250    5/    1/          3/ 2 330320
 .6875   11/16    5/          3/ 2 330322
 .7500    3/    5/          5/ 2 330324
 .8125   13/16    5/          5/ 2 330326
 .8750    7/    5/  1/         2 330328
 .9375   15/16    7/  1/         2 330330
1.0000            7/  1/         2 330332
1.1250  1/          1/  1/ 2 330336
1.2500  1/          1/  1/ 2 330340
1.5000  1/  1/  1/  1/ 2 330348
* Call for price & availability.

Do you need special Two Straight Flute End Mills?

If you can't find the specific Two Straight Flute End Mills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Two Straight Flute End Mills.

Thank you for using Lexington Cutter for your Two Straight Flute End Mills.