Menu
SEMI-FINISHED TYPE 3440 - LEFT SPIRAL FLUTE LONG CARBIDE
TYPE
Semi-finished reamers are furnished with a tool diameter above the largest diameter indicated in the size range column below.

Before semi-finished reamers can be used, the tool diameter must be finished ground and relieved. The reamer end must be faced and chamfered.

Semi-finished reamers are used by regrind shops or distributors and users with regrind facilities.

Below is Lexington Cutter's selection of Semi-finished Reamers. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
Pin cross hole permits use in floating holders.
SEMI-FINISHED
TOOL DIAMETER
RANGE
EDP
NO.
PRICE
EACH
 .1770 -  .2040 344006SF $52.30
 .2041 -  .2210 344007SF 52.30
 .2211 -  .2380 34402344SF 52.30
 .2381 -  .2530 344008SF 52.30
 .2531 -  .2840 344009SF 52.30
 .2841 -  .3150 344010SF 60.75
 .3151 -  .3470 344011SF 61.40
 .3471 -  .3780 344012SF 66.50
 .3781 -  .4090 344013SF 67.35
 .4091 -  .4410 344014SF 79.95
 .4411 -  .4720 344015SF 79.95
 .4721 -  .5030 344016SF 87.35
 .5031 -  .5340 344017SF 87.35
 .5341 -  .5660 344018SF 92.20
 .5661 -  .5970 344019SF 92.20
 .5971 -  .6280 344020SF 94.65
 .6281 -  .6590 344021SF 94.65
 .6591 -  .6910 344022SF 99.00
 .6911 -  .7220 344023SF 99.00
 .7221 -  .7530 344024SF 101.50
 .7531 -  .7840 344025SF 101.50
 .7841 -  .8160 344026SF 110.25
 .8161 -  .8470 344027SF 110.25
 .8471 -  .8780 344028SF 120.45
 .8781 -  .9090 344029SF 120.45
 .9091 -  .9410 344030SF 132.65
 .9411 -  .9720 344031SF 132.65
 .9721 - 1.0030 344032SF 139.30
1.0031 - 1.0660 344034SF 139.30
1.0661 - 1.1280 344036SF 162.95
1.1281 - 1.1905 344038SF 169.90
1.1906 - 1.2530 344040SF 199.10
1.2531 - 1.3155 344042SF 199.10
1.3156 - 1.3780 344044SF 201.80
1.3781 - 1.4405 344046SF 235.35
1.4406 - 1.5030 344048SF 282.65

Do you need special Semi-finished Reamers?

If you can't find the specific Semi-finished Reamers you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Semi-finished Reamers.

Thank you for using Lexington Cutter for your Semi-finished Reamers.