Menu
STEP REAMER TYPE 3482ST - STRAIGHT SHANK - LEFT SPIRAL FLUTE LONG CARBIDE - FOR NON-FERROUS
TYPE
Flute long carbide tips brazed to one piece hardened alloy steel bodies. Left spiral polished flutes. Available with cutting or non-cutting pilots.
Left spiral flutes should only be used on through holes and very hard materials. Finishes are much better as spiral flutes tend to bridge interruptions such as keyways, slots or intersecting holes. NAS 897 chucking reamers manufactured to national aerospace standards 897 C with flute long carbide. Tool geometry and carbide grade appropriate for material being machined.
NOTES:
  1. Order must indicate if pilot is cutting or non-cutting and identify material being machined.
  2. The difference between major and minor diameter shall not exceed 6%, and must fall within dimensions shown for that particular tool.
  3. Non-cutting pilot diameters may be smaller than cutting diameter range, but not less than non-cutting pilot minimum diameter dimension shown.
  4. It is recommended that stock removal of 3% be the basis for selecting each cutting diameter.
Below is Lexington Cutter's selection of Step Type Reamers. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
Shanks are ground to the next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter.
Shank diameter tolerance thru 23/32" tool diameter: +.0000"/-.0010".
Shank diameter tolerance over 23/32" tool diameter: +.0000"/-.0015".
MAJOR AND MINOR
CUTTING DIAMETER
RANGE
NON-CUT
PILOT MIN.
DIAM.
MAX
SHANK
DIAM.
NO.
OF
FLTS.
FLT.
LEN.
OVER
ALL
LEN.
EDP
NO.
PRICE EACH - FINISHED TO DECIMAL SIZE
1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14 15+
 .2841 -  .3150  .2670  .2792 4  1/         348210ST $214.50 $169.20 $154.05 $146.80 $138.95 $132.85 $124.05
 .3151 -  .3470  .2960  .2792 4  1/         348211ST 227.15 181.80 166.60 159.40 151.60 145.55 136.55
 .3471 -  .3780  .3260  .3105 4  3/         348212ST 228.40 183.00 167.95 160.65 152.90 146.80 137.85
 .3781 -  .4090  .3550  .3105 4  3/         348213ST 234.45 189.05 174.00 166.75 158.95 152.90 144.00
 .4091 -  .4410  .3850  .3730 6  3/         348214ST 239.95 194.65 179.50 172.35 164.55 158.50 149.60
 .4411 -  .4720  .4150  .3730 6  3/         348215ST 249.55 204.20 189.00 181.85 174.10 168.00 159.10
 .4721 -  .5030  .4440  .4355 6                 348216ST 257.95 211.45 195.80 188.45 180.45 174.25 165.05
 .5031 -  .5340  .4730  .4355 6                 348217ST 262.85 216.30 200.70 193.20 185.35 179.05 169.80
 .5341 -  .5660  .5020  .4355 6                 348218ST 262.85 216.30 200.70 193.20 185.35 179.05 169.80
 .5661 -  .5970  .5320  .4355 6                 348219ST 267.90 221.35 205.65 198.25 190.35 184.10 174.85
 .5971 -  .6280  .5610  .5615 6  1/         348220ST 267.90 221.35 205.65 198.25 190.35 184.10 174.85
 .6281 -  .6590  .5900  .5615 6  1/         348221ST 273.35 226.80 211.25 203.85 195.80 189.55 180.45
 .6591 -  .6910  .6200  .5615 6  1/         348222ST 284.55 238.00 222.45 215.05 207.00 200.75 191.65
 .6911 -  .7220  .6500  .5615 6  1/         348223ST 287.40 241.00 225.40 217.90 210.05 203.75 194.55
 .7221 -  .7530  .6790  .6245 6  1/  1/ 348224ST 290.35 243.75 228.20 220.85 212.85 206.55 197.45
 .7531 -  .7840  .7080  .6245 6  1/  1/ 348225ST 295.60 249.00 233.50 226.05 218.00 211.75 202.65
 .7841 -  .8160  .7370  .6245 6  1/  1/ 348226ST 295.60 249.00 233.50 226.05 218.00 211.75 202.65
 .8161 -  .8470  .7670  .6245 6  1/  1/ 348227ST 306.60 260.05 244.50 237.00 229.05 222.80 213.70
 .8471 -  .8780  .7970  .7495 6  5/ 10         348228ST 318.10 269.85 253.70 246.00 237.70 231.20 221.75
 .8781 -  .9090  .8260  .7495 6  5/ 10         348229ST 354.70 306.30 290.20 282.45 274.20 267.60 258.25
 .9091 -  .9410  .8550  .7495 8  5/ 10         348230ST 354.70 306.30 290.20 282.45 274.20 267.60 258.25
 .9411 -  .9720  .8850  .7495 8  5/ 10         348231ST 367.35 319.05 302.80 295.10 286.95 280.40 270.90
 .9721 - 1.0030  .9140  .8745 8  3/ 10  1/ 348232ST 367.35 319.05 302.80 295.10 286.95 280.40 270.90
1.0031 - 1.0660  .9430  .8745 8  3/ 10  1/ 348234ST 414.70 366.45 350.30 342.60 334.30 327.80 318.20
1.0661 - 1.1280 1.0020  .8745 8  7/ 11         348236ST 424.50 376.30 360.10 352.40 344.20 337.70 328.25
1.1281 - 1.1905 1.0610  .9995 8  7/ 11         348238ST 441.40 393.10 377.00 369.30 361.00 354.60 345.05
1.1906 - 1.2530 1.1200  .9995 8         11  1/ 348240ST 461.30 413.05 396.90 389.20 380.95 374.45 364.90
1.2531 - 1.3155 1.1780  .9995 8         11  1/ 348242ST 500.45 452.05 435.95 428.25 420.00 413.35 403.95
1.3156 - 1.3780 1.2370  .9995 8  1/ 12         348244ST 538.95 490.70 474.45 466.75 458.50 451.90 442.55
1.3781 - 1.4405 1.2960  .9995 8  1/ 12         348246ST 565.20 516.95 500.70 493.00 484.80 478.30 468.85
1.4406 - 1.5030 1.3550 1.2495 8  1/ 12  1/ 348248ST 591.85 543.40 527.15 519.55 511.30 504.75 495.40

Do you need special Step Type Reamers?

If you can't find the specific Step Type Reamers you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Step Type Reamers.

Thank you for using Lexington Cutter for your Step Type Reamers.