• Arbor Type Milling Cutters
  • Made to Size
  • General Purpose
  • 4" Diameter
  • Radius or Chamfer on Both Sides or Full Radius

355938R2

Details At A Glance

Tool Diameter Decimal Size Range Number of Teeth
4 0.4063 – 0.4687 14

Description

14 Teeth
C-2(m) Carbide
5° Positive Radial Rake
Width Tolerance: +.001”/-.000”
OD tolerance: +.0313”/-.000”
1” Arbor hole +.001”/-.000”
ANSI standard keyway dimensions
Add 5% to grind the hub width thinner
Add 5% to match OD’s on cutter sets within .001”
Not designed to be used on heat treated materials greater than 363 Brinell (39Rc)
Radius Notes:
Maximum radius on one side is .2656”
Full radius and maximum radius on both sides is 1/2 the width of the cutter
A non-tangent radii must be quoted
Chamfer Notes:
Chamfer Angles can range from 0° to 45°
Chamfer is measured off of the OD
Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656” length of angle when measured across the OD
Chamfer Angle Tolerance: +/- 1/2°
Chamfers greater than 45° must be quoted
Alternating Chamfers add 5%

Additional information

1 Piece

836.3

2 Pieces

766

3 Pieces

756.25

4 Pieces

751

5-7 Pieces

747.9

New_Lex_PriceQty8

746.45

Tool Diameter

4

Decimal Tool Diameter

4.0000

Number of Teeth

14

Mod Diameter Range Low

0.4063

Mod Diameter Range High

0.4687

Hub Width

0.4375

Weight

1.57474554

Price Each – Finished to Decimal Size

Decimal Range 1 Piece 2 Pieces 3 Pieces 4 Pieces 5 Pieces 6 Pieces
0.4063 - 0.4687 $836.30 $766.00 $756.25 $751.00 $747.90 $746.45

Do you need special Made to Size Arbor Type Milling Cutters?
If you can't find the specific Made to Size Arbor Type Milling Cutters you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Made to Size Arbor Type Milling Cutters.